1 of 9 optimum technology matching? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt functional block diagram rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . ordering information rf mems ldmos 1 7 8 2 gnd 3 vpc 4 nc 5 6 gnd voltage variable attenuator vcc rf out rf in vctrl rva3007l analog controlled variable gain amplifier rfmd?s rva3007l is a fully integrated analog controlled variable gain amplifier featuring exceptional linearity over a greater than 19db gain control range. this variable gain amplifier is controlled by a single 0v to 3.3v positive supply voltage. the rva3007l is packaged in a small 7mmx7mm leadless laminate mcm which contains solid thermal vias for ultra low thermal resistance. this module is internally matched to 50 ? and is easy to use with no external matching components required. features ? 2440mhz to 2750mhz operation ? gain=28db typical ? gain adjustment range >19db ? acpr = -64 dbc typ. at +12dbm p out (dual carrier wcdma) ? small, 7mmx7mm, multi-chip module applications ? cellular, 3g and 4g infrastructure ? wibro, wimax, lte ? microwave radio ? high linearity power control ds111014 ? package: mcm, 7mm x7mm rva3007lana- log controlled variable gain amplifier rva3007lsq sample bag with 25 pieces rva3007lsr 7? sample reel with 100 pieces rva3007ltr7 7? reel with 1500 pieces RVA3007LTR13 13? reel with 2500 pieces rva3007lpck-410 2440mhz to 2750mhz pcba with 5-piece sample bag
2 of 9 rva3007l ds111014 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . absolute maximum ratings parameter rating unit max device current 770 ma max device voltage 5.5 v max control line voltage 6 v max rf input power* 12 dbm max junction temp (t j )+150c max storage temp +150 c thermal resistance (junction to backside of module) 14.8 c/w esd class 1c (1000v min) moisture sensitivity level msl3 *load condition: z l =50 ? parameter specification unit condition min. typ. max. frequency 2440 2750 mhz temperature range -40 25 +85 c operating range gain 25 28 31 db min attenuator setting nominal operating output power 12 dbm operating power for acpr rating output ip3 39 45 dbm in high gain setting p1db 27 29.5 dbm high gain setting acpr -58 -64 dbc dual carrier wcdma, 7.5db cf at nominal operating power; over full attenuation range gain flatness 0.2 0.4 db over 50mhz bw gain adjustment range 19 db control voltage range 0 3.3 v noise figure 5.0 6.5 db min attenuator setting impedance 50 ? input return loss 9 12 db over attenuation range output return loss 11 18 db over attenuation range supply voltage 4.75 5.0 5.25 v supply current 300 410 550 ma max current is at -40c supply current (vpc=0v) 65 85 100 ma output amplifier shutdown total current; vpc=0v caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. ex tended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the devi ce under absolute maximum rating condi- tions is not implied. the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice. rohs (restriction of hazardous subs tances): compliant per eu directive 2002/95/ec.
3 of 9 rva3007l ds111014 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com .
4 of 9 rva3007l ds111014 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com .
5 of 9 rva3007l ds111014 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . evaluation board schematic evaluation board bill of materials (bom) description reference designator manufacturer manufacturer?s p/n evaluation board ddi rfvax007l410(a) cap, 1 ? f, 10%, 10v, x5r, 0402 c7, c9- c10 murata electronics grm155r61a105ke15d res, 0 ???? 0402 r1 kamaya, inc rmc1/16sjpth conn, sma, end launch, univ, hyb mnt, flt j1-j2 heilind electronics per mat-21-1038 conn, hdr, st, plrzd, 4-pin, 0.100? p2 itw pancon mpss100-4-c conn, hdr, st, plrzd, 2-pin, 0.100? p1 itw pancon mpss100-2-c dnp c1, c3-c4, c6, c11-c12, r3-r5 rva3007l module u1 rfmd rva3007l
6 of 9 rva3007l ds111014 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . pin table and description pin function description 1rfin rf input pin. internal dc block. 2gnd ground pin. 3vpc power up/down control for 2nd stage amplifier. apply v cc to power on 2nd stage amplifier. apply 0v to disable 2nd stage amplifier. do not exceed v cc +0.5v. connect to v cc if not needed. decoupling capacitor may be desired on application board for control line noise. 4nc no connection. 5vcc power supply for the module. recommending 1u f decoupling cap on the application board. 6gnd ground pin. 7rfout rf output pin. internal dc block. 8vctrl gain control voltage; 0v to 3.3v range. maximum gain at 0v. recommending 0.1uf decoupling on the applica- tion board. center pad gnd center ground pads need to have a good thermal path on the application board. use solder stencil pattern shown in the document to define solder paste during assembly.
7 of 9 rva3007l ds111014 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . application schematic (without using final stage amplifier power down control) application schematic (using final stage amplifier power down control) 1 7 8 2 gnd 3 vpc 4 nc 5 6 gnd voltage variable attenuator rf out rf in 1 uf vcc vcntrl 0.1 uf 1 7 8 2 gnd 3 4 nc 5 6 gnd voltage variable attenuator rf out rf in 1 uf vcc vcntrl 0.1 uf 0.1 uf vpc
8 of 9 rva3007l ds111014 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . package drawing branding diagram
9 of 9 rva3007l ds111014 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com . evaluation board assembly drawing pcb design requirements note: this solder stencil pattern is required to prevent solder voiding that may impact thermal dissipation.
|
